CONSTANT PINION SHAFT
Part Number: DAM1005
Application: (c) G-AN6, to (g) 59162, from (g) 60001 to (g) 65224
Notes: 1st motion shaft
CONSTANT PINION SHAFT
Part Number: DAM2818
Application: (c) G-AN6, from (g) 59163 to (g) 60000, from (g) 65225
Notes: 1st motion shaft
SPACER WASHER
Part Number: 22G1869
Application: (c) G-AN6, to (g) 59162, from (g) 60001 to (g) 65224
SHIM, under synchro spring
Part Number: 037948
Notes: This shim is selectively fitted under each of the springs and balls in the two synchro hubs in the gearbox. Its use is to equalise the outward pressure of the balls in the hub. Equalising the pressure can only be achieved with special spring balance equipment, so it only remains to be said that if you have to take a hub apart for inspection or cleaning, make sure by means of scribing identifying marks on non-working surfaces of the gear that the correct shims go back in their respective holes.... See more
BAULK RING, 3rd gear
Part Number: 150328
Notes: Along the same lines as the above, use corresponding scribed marks on the hub and outer ring to ensure that the ring is slipped back in place exactly as it was before and the same way round!.... See more
SYNCHRO HUB, 1st/2nd gear
Part Number: 156911WO
Application: (c) G-AN6, to (g) 241363
Notes: Outer gear only
SYNCHRO HUB, 1st/2nd gear, 29 teeth
Part Number: DAM6828WO
Application: (c) G-AN6, from (g) 241364
Notes: Outer gear only
LAYGEAR CLUSTER
Part Number: 22G1818
Application: (c) G-AN6, to (g) 241363
Notes: 21 tooth reverse gear
LAYGEAR CLUSTER
Part Number: DAM6475
Application: (c) G-AN6, from (g) 241364
REVERSE IDLER GEAR, 21 tooth gear
Part Number: 144580
Application: (c) G-AN6, to (g) 241363
REVERSE IDLER GEAR
Part Number: DAM6826
Application: (c) G-AN6, from (g) 241364