Bush Set, wishbone, lower inner, polyurethane

Handling improvements can be obtained from the better location of the wishbone arms, and other areas of the suspension that are fitted with standard (soft type) bushes as originally fitted. These can be replaced by using a harder grade of rubber, polyurethane, or for competition, nylatron. Nylatron bushes are not recommended for road use unless you are willing to accept an increase road noise and a harsher ride, they must also be fitted carefully to ensure the correct working clearance is obtained - and they must be inspected on a regular basis. Please contact your local Moss branch for fitting details. Nylatron has been used on competition cars for many years, it is hard and unforgiving, whereas the modern polyurethane bush has a softer edge and is more easily installed. Road cars can benefit greatly from polyurethane bushes without the harsh ride associated with nylatron. Nylatrons strength does mean that we are able to offer the top trunnion bush with an offset drilled centre hole, this allows the suspension camber to be adjusted. The fitting of nylatron bushes is best left to someone with engineering experience.