CARBURATEUR, H4 1 1/2, la paire
Part Number: AUC721T
Application: TR2, H4 SU
Notes: These are identified by the fact that each carburettor is mounted to the inlet manifold with only 2 studs.
DAMPER & CAP, brass
Part Number: AUC8103HB
Application: TR2, H4 SU
Notes: Alternative. AUC8103HB is a brass capped damper assembly as fitted originally to TR2's. AUC8103A is the 'modern' replacement plastic capped damper.... See more
DAMPER & CAP, plastic
Part Number: AUC8103A
Application: TR2, H4 SU
Notes: Alternative. AUC8103HB is a brass capped damper assembly as fitted originally to TR2's. AUC8103A is the 'modern' replacement plastic capped damper.... See more
NEEDLE, jet, standard, (FV)
Part Number: AUD1201
Application: TR2, H4 SU
Notes: SU offered two different needles as standard for the TR2 (H4 SU's), but Triumph rationalised them in 1954 to the FV specification, which we supply under part number AUD1201.... See more
BUSH, throttle shaft, (in carburettor body)
Part Number: AUD3080
Application: TR2, H4 SU
Notes: These bushes require machine shop installation.
NUT, short rod to throttle shaft lever
Part Number: JN2107
Application: TR2, H4 SU
BEARING KIT, jet
Part Number: WZX1593
Application: TR2, H4 SU
Notes: Includes items 94 to 105 for 1 carburettor.
JET ASSEMBLY KIT
Part Number: WZX1595
Application: TR2, H4 SU
Notes: Includes items 96, 101, 102 for 1 carburettor.
GROSE JET
Part Number: GAC9201X
Application: TR2, H4 SU
Notes: Superior replacement for standard needle and seat. Highly recommended
FLOAT LID, float chamber
Part Number: AUE479
Application: TR2, H4 SU
Notes: Replacement. The float lid on carburettor AUC721 had a fuel input from the engine side and utilised a front lid - which is no longer available. It also used the early float lever (AUC1980, item 128), and is now replaced with lid AUE479, which uses the later float lever (AUC2285, item 129). We can currently offer a complete assembly for this float lid (with the AUC2285 type lever) under part number AUE255.... See more
INSULATING BLOCK
Part Number: AHH5713
Application: TR2, H4 SU
Notes: Carburettor to manifold. AHH5713 is virtually a direct replacement for the Triumph part no. 102485. It is in fact, an MGA part, but is slightly different, and therefore should only be used for a TR2 application if fitted in pairs.... See more
SET SCREW, air cleaner to carburettor
Part Number: SH605071
Application: TR2, H4 SU
POCHETTE de JOINT, carburateur
Part Number: AUE801A
Application: TR2, H4 SU
Notes: For one carburettor. Includes mounting gaskets.
POCHETTE de JOINT, Carburateur SU H4
Part Number: AUE2
Application: TR2, H4 SU
Notes: For two carburettors
REBUILD KIT, H4 carburettors
Part Number: GAC6102X
Application: TR2, H4 SU
Notes: For two carburettors. Includes items: 8, 12, 18, 26, 69, 70, 93, 106, 130, 131
Loading...