Permatex Dual Syringe, Plastic Weld Epoxy, 2x25ml
12,96 €
M'avertir d'un changement de tarif
En Stock
GGL1041 Permatex Dual Syringe, Plastic Weld Epoxy, 2x25ml PERMATEX DUAL SYRINGE A structural adhesive designed for general purpose bonding of a wide variety of material such as hard and soft plastics to specified surfaces. Forms a tough, durable bond to most plastics, composites, ceramics, wood in any combination. Fast curing product with gelling of mixed adhesive in 5-6 minutes and fixturing in 9-10 minutes.NOTE: Will not bond most polyethylene or polypropylene plastics. • Bonds hard and soft plastics to specified surfaces. • Requires no primers, sets in five minutes at room temperature. • Cream appearance. • Gap filling to 0.125 inch. • Water resistant and good chemical resistance. • Temperature range -51°C to 121°C. • Permanent strength up to 3500 PSI.How to use: • PROTECT: Work area must be protected from accidental spills. • CLEAN: Surfaces must be clean, dry and free of grease and oil. • PREPARE: Roughen smooth surfaces (using abrasivesor sandpaper). • OPEN PACKAGE: Remove Syringe. Turn syringe nozzle end up and pull plunger backslightly (1/8”). Allow air bubbles to rise to top. Snap off and save storage cap. Push plunger to dispense equal amounts of hardener and resin onto discard-able surface such as a piece of cardboard. Mixing paddle will pop out from plunger. Pull back plunger to stop flow. Snap cap back on. • MIX THOROUGHLY: Thoroughly mix with paddle provided for two minutes until evenly colored. • APPLICATION: Apply small amount of mixture to both surfaces and assemble parts immediately(product sets in approximately 4 - 6 minutes). Remove any excess immediately. • CURE TIME: Usable strength is reached in 4 hours at 72ºF (22ºC). Cooler temperatures may require longer set time • CLEAN-UP: Attach nozzle cap and store in moulded tray.Suggested Application for Automobile: • Bonds rigid materials including ABS, acrylic, fiberglass, FRP, glass, PVC, SMC, steel, styrene, vinyl, and wood. • Use for interior trim, fills cracks, bonds most plastic, bonds plastic to vinyl