Permatex Dual Syringe, Multi Metal, 2x25ml
12,84 €
M'avertir d'un changement de tarif
En Stock
Versatile, easy-to-use, multi-metal adhesive is two-part adhesive and filler system that eliminates the need for welding or brazing. • Sets in four minutes, no clamping needed. • Dark grey appearance. • Fills gaps and will not shrink. • When cured, can be drilled, sanded, threaded or filed. • Resistant to water and solvents. • Temperature range -60°F to 300°F (-51°C to 149°C). • Permanent strength up to 4500 PSI. How to use • PROTECT: Work area must be protected from accidental spills • CLEAN: Surfaces must be clean, dry and free of grease and oil. • PREPARE: Roughen smooth surfaces (using abrasivesor sandpaper). • OPEN PACKAGE: Remove Syringe. Turn syringe nozzle end up and pull plunger backslightly (1/8”). Allow air bubbles to rise to top. Snap off and save storage cap. Push plunger to dispense equal amounts of hardener and resin onto discard-able surface such as a piece of cardboard. Mixing paddle will pop out from plunger. Pull back plunger to stop flow. Snap cap back on. • MIX THOROUGHLY: Thoroughly mix with paddle provided for two minutes until evenly colored. • APPLICATION: Apply small amount of mixture to both surfaces and assemble parts immediately(product sets in approximately 4 - 6 minutes). Remove any excess immediately. • CURE TIME: Usable strength is reached in 4 hours at 72ºF (22ºC). Cooler temperatures may require longer set time. • CLEAN-UP: Attach nozzle cap and store in moulded tray.[/expand]WARNING: Adhesive will not bond most polyethylene or polypropylene plasticsSuggested Application for Automobile: • Ideal for complex, multi-piece assemblies. • Bonds rigid materials including aluminium, brass, chrome, copper, iron, stainless steel, steel. • Use to seal welded seams, fills metal cracks, mount metal components