CYLINDER HEAD, recon/exchange
Part Number: 12A1455LFE
Application: 803-948cc
Notes: Lead-free reconditioned cylinder head assembly with valves, guides & springs. Casting number 12A1456.
CYLINDER HEAD, recon/exchange
Part Number: 28G193LF
Application: 948cc
Notes: Lead-free reconditioned cylinder head assembly with valves, guides & springs. Casting number 2A629.
CYLINDER HEAD, recon/exchange
Part Number: 28G191LF
Application: 1098cc
Notes: Lead-free reconditioned cylinder head assembly with valves, guides & springs. Casting number 12G202.
GASKET SET, ‘De Coke’, head set, aftermarket
Part Number: AJM102Z
Application: 948-1098cc
PLUG, oil holes
Part Number: 12G3503
Notes: Plug for oil holes at either end of head and hole on top of face of head.
Prix normal 13,56 €
Special Price 12,20 €
Prix normal 15,84 €
Special Price 12,67 €
Prix normal 8,16 €
Special Price 6,53 €
ROCKER ASSEMBLY, recon/exchange
Part Number: 12A1950K
Notes: Reconditioned rocker shaft assembly built with new shaft, rocker arm bushes.
ROCKER SHAFT, with end plugs
Part Number: 12A1950
Notes: Original rocker shafts were located by the front pedestal. The front pedestal also acts as an oil feed pipe for the rocker shaft & rockers. Our rocker shafts are machined so they can be located by either the first or second pedestal. Ensure the pedestal selected for the front position has the small oil feed hole in the bottom face that feeds to the rocker shaft.... See more
ROCKER SHAFT, aftermarket
Part Number: 12A1950Z
Notes: Original rocker shafts were located by the front pedestal. The front pedestal also acts as an oil feed pipe for the rocker shaft & rockers. Our rocker shafts are machined so they can be located by either the first or second pedestal. Ensure the pedestal selected for the front position has the small oil feed hole in the bottom face that feeds to the rocker shaft.... See more
PEDESTAL, rocker shaft
Part Number: 12G1927
Notes: Without oil feed hole. With tapped hole for rocker shaft locating peg. Use in position 2.
SPACER SET, rocker
Part Number: CAEG392
Notes: The friction and side loads on the rockers can be reduced and the location improved by using a steel spacer set instead of the rocker shaft springs.... See more
SCREW, rocker adjusting
Part Number: 12A1215
Application: Cast type rocker arms
BUSH, rocker
Part Number: 2A21
Application: Cast type rocker arms
Notes: Bush must be reamed & drilled.
ROCKER ARM, pressed
Part Number: 2A964
Application: Pressed type rocker arms
SCREW, rocker adjusting
Part Number: 12A1215
Application: Pressed type rocker arms
NUT, locking
Part Number: 6K654
Application: Pressed type rocker arms
ROCKER ARM, forged, bushed
Part Number: 12G1221
Application: Forged type rocker arms
Notes: Must be reamed to suit rocker shaft.
SCREW, rocker adjusting
Part Number: AEG167
Application: Forged type rocker arms
NUT, locking
Part Number: NT605041
Application: Forged type rocker arms
BUSH, rocker
Part Number: 2A21
Application: Forged type rocker arms
Notes: Bush must be reamed & drilled.
RIVET, rocker arm
Part Number: 5C2436
Application: Forged type rocker arms
ROCKER ARM, sintered
Part Number: CAM289
Application: Sintered type rocker arms
SCREW, rocker adjusting
Part Number: 12H3376
Application: Sintered type rocker arms
NUT, locking
Part Number: 51K1178
Application: Sintered type rocker arms
VALVE SPRING SET, double spring
Part Number: AEA401K
Notes: Set includes 8 pairs of springs. Use double springs to reduce valve bounce at high engine speeds.
Prix normal 1,08 €
Special Price 0,86 €
Prix normal 7,80 €
Special Price 6,24 €
Prix normal 8,16 €
Special Price 6,53 €
Prix normal 9,60 €
Special Price 7,68 €